3 <meta name="Author" content="Marcin Wiacek">
\r
4 <meta name="Description" content="NOKIA NetMonitor description (English version)">
\r
5 <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
\r
6 <meta name="language" content="us">
\r
7 <meta name="revisit-after" content="15 days">
\r
8 <meta name="Robots" content="all">
\r
9 <meta name="KeyWords" content="3110, 9110, GSM, DCS, Nokia, 3210, 5110, 5130, 6110, 6130, 6150, 8810, FAQ, NetMonitor, Marcin, Wiacek, Marcin Wiacek">
\r
10 <title>NetMonitor in Nokia phones (2/7)</title>
\r
11 <link rel="stylesheet" href="../../styl.css" type="text/css">
\r
13 <body bgcolor="#FFFFFF" text="#2B2B69" link="#525FF5" vlink="#525FF5" alink="#2FA030">
\r
15 <font class="drukuj">
\r
16 <p align="RIGHT"><a class="autoremail" href="../../index.htm">Main page</a></p>
\r
18 <center><font color="#1F409F" size=+2 class="tytul">NetMonitor in Nokia phones (2/7)</font>
\r
19 <font class="drukuj">
\r
20 <p><a href="faq_net0.htm">[Part 1]</a><b>[Part 2]</b><a href="faq_net2.htm">[Part 3]</a><a href="faq_net3.htm">[Part 4]</a><a href="faq_net4.htm">[Part 5]</a><a href="faq_net5.htm">[Part 6]</a><a href="faq_net6.htm">[Part 7]</a>
\r
24 <hr noshade width="60%" style="color: #004080" align=center>
\r
27 <font class="drukuj">
\r
29 <li><a href="faq_net0.htm#1"><b>What is it ?</b></a></li>
\r
30 <li><a href="faq_net0.htm#2"><b>Do I need it ?</b></a></li>
\r
31 <li><a href="faq_net0.htm#3"><b>Does my phone use more power with NetMonitor enabled ?</b></a></li>
\r
32 <li><a href="faq_net0.htm#4"><b>How to activate it ?</b></a></li>
\r
33 <li><a href="faq_net0.htm#5"><b>Which NetMonitor version can be activated in my phone ?</b></a></li>
\r
34 <li><a href="faq_net0.htm#6"><b>Does NetMonitor activation void warranty ?</b></a></li>
\r
35 <li><a href="faq_net0.htm#7"><b>NetMonitor menu in my phone has different number than 10. Is it normal ?</b></a></li>
\r
36 <li><a href="faq_net0.htm#8"><b>NetMonitor menu in my phone has 11 number, hovewer previous position has 9 number. Is it normal ?</b></a></li>
\r
37 <li><a href="faq_net0.htm#9"><b>How to use it ?</b></a></li>
\r
38 <li><a href="faq_net0.htm#10"><b>Can I damage my phone ?</b></a></li>
\r
39 <li><a href="#11"><b>Glossary</b></a></li>
\r
40 <li><a href="faq_net2.htm#12"><b>Description of the individual tests</b></a></li>
\r
41 <li><a href="faq_net6.htm#13"><b>You can also use a program...</b></a></li>
\r
42 <li><a href="faq_net6.htm#14"><b>Can I use NetMonitor without SIM card inserted, without PIN number entered or when SIM card is not active ?</b></a></li>
\r
43 <li><a href="faq_net6.htm#15"><b>How can I disable NetMonitor ?</b></a></li>
\r
44 <li><a href="faq_net6.htm#16"><b>Do I need to disable NetMonitor before sending my phone to the service ?</b></a></li>
\r
45 <li><a href="faq_net6.htm#17"><b>Is it possible to re-activate NetMonitor after disabling it ?</b></a></li>
\r
46 <li><a href="faq_net6.htm#18"><b>Is NetMonitor available in analog Nokia phones ?</b></a></li>
\r
47 <li><a href="faq_net6.htm#19"><b>Does NetMonitor allow to use phone like broadcast station ?</b></a></li>
\r
48 <li><a href="faq_net6.htm#20"><b>I don't have all described tests in my phone. Why ? Can I increase their number ?</b></a></li>
\r
49 <li><a href="faq_net6.htm#21"><b>Does NetMonitor allow to identify place, where is my interlocutor ?</b></a></li>
\r
50 <li><a href="faq_net6.htm#22"><b>Does NetMonitor allow to identify place, where am I ?</b></a></li>
\r
51 <li><a href="faq_net6.htm#23"><b>What are NetMonitor codes ?</b></a></li>
\r
52 <li><a href="faq_net6.htm#24"><b>Is it the truth, that in phones with additional hardware changing frequency band NetMonitor doesn't work correct ?</b></a></li>
\r
53 <li><a href="faq_net6.htm#25"><b>Where can I find description of FBUS/MBUS protocol and commands connected with NetMonitor ?</b></a></li>
\r
54 <li><a href="faq_net6.htm#26"><b>I have non existing networks on the list of forbidden networks...</b></a></li>
\r
55 <li><a href="faq_net6.htm#27"><b>How to check frequency band (900 or 1800 Mhz), where phone work in this moment ?</b></a></li>
\r
56 <li><a href="faq_net6.htm#28"><b>Can I use DLR-2/DLR-3 cables for activating netmonitor ?</b></a></li>
\r
57 <li><a href="faq_net6.htm#29"><b>Can I activate netmonitor using Init File Editor (Nokia 9110) ?</b></a></li>
\r
58 <li><a href="faq_net6.htm#30"><b>Can I force phone to use one frequency band (900 or 1800 Mhz) only ?</b></a></li>
\r
59 <li><a href="faq_net6.htm#31"><b>How to change settings in tests ?</b></a></li>
\r
60 <li><a href="faq_net6.htm#32"><b>My phone has very short snandby time - it is possible to see the reason of it ?</b></a></li>
\r
61 <li><a href="faq_net6.htm#33"><b>Is netmonitor available in English version only ?</b></a></li>
\r
62 <li><a href="faq_net6.htm#Literatura"><b>Information sources</b></a></li>
\r
63 <li><a href="faq_net6.htm#35"><b>Additional information</b></a></li>
\r
64 <li><a href="faq_net6.htm#36"><b>Does using/activating netmonitor cost anything ?</b></a></li>
\r
65 <li><a href="faq_net6.htm#37"><b>Does using netmonitor is legall ?</b></a></li>
\r
66 <li><a href="faq_net6.htm#38"><b>Which entries on SIM card are used in netmonitor tests ?</b></a></li>
\r
67 <li><a href="faq_net6.htm#39"><b>Can I activate netmonitor in 3310 using soft working with 3210 ?</b></a></li>
\r
68 <li><a href="faq_net6.htm#40"><b>After activating netmonitor/BTS TEST my phone can't find network...</b></a></li>
\r
69 <li><a href="faq_net6.htm#41"><b>Netmonitor shows different battery capacity than info on it...</b></a></li>
\r
71 <hr size="2" noshade width="60%" align="center" style="color: #004080">
\r
74 <p><a NAME="11"></a><font color="#1F409F" size="+2" class="dzial">11. Glossary</font><br>
\r
75 <hr align="LEFT" size="3" width="300" color="#60c0a0" noshade>
\r
77 <p>Here you can find explanation to some terms, which can be found in this FAQ:
\r
79 <p><a NAME="ACCH"></a><b>ACCH</b> (<b>A</b>nalog <b>C</b>ontrol <b>Ch</b>annel)
\r
80 <font size=-2>(TDMA 800/TDMA 1900)</font>
\r
82 <p><A name="AMPS"></a><b>AMPS</b> (<b>A</b>dvanced <b>M</b>obile <b>P</b>hone <b>S</b>ervice)
\r
83 <br>Analogue cellular system working in 800 Mhz used, for example, in North America.
\r
85 <p><a NAME="ASIC"></a><b>ASIC</b> (<b>A</b>pplication <b>S</b>pecific <b>I</b>ntegrated <b>C</b>ircuit)
\r
86 <br>Electronic chips designed for some concrete purposes
\r
87 (for example, in phone it controlls communication between <a href="#MCU">MCU</a> and <a href="#DSP">DSP</a>)
\r
88 They're designed and produced by the companies which use them.
\r
90 <p><a NAME="AVCH"></a><b>AVCH</b> (<b>A</b>nalog <b>V</b>oice <b>Ch</b>annel)
\r
91 <font size=-2>(TDMA 800/TDMA 1900)</font>
\r
93 <p><a NAME="BCC"></a><b>BCC</b> (<b>B</b>ase-station <b>C</b>olor <b>C</b>ode)
\r
94 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
95 <br>3-bit number (from 0-7 range) used to distinguish neighbor cells of the same operator,
\r
96 transmitting using <a href="faq_net2.htm#BCCH">BCCH</a> in the same
\r
97 <a href="#FDMA">FDMA</a> channel. Such distinguish is not needed when the cells belong to different operators
\r
98 (they use different channels and their <a href="faq_net2.htm#BCCH">BCCH</a> are in different FDMA channels).
\r
99 It is given in <a href="#BSIC">BSIC</a> of each <a href="#BTS">BTS</a> (you can check it for example in
\r
100 <b><a href="faq_net2.htm#Menu2">test 2</a></b>).
\r
102 <p><a NAME="BSC"></a><b>BSC</b> (<b>B</b>ase <b>S</b>tation <b>C</b>ontroller)
\r
103 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
104 <br>It controls and supervises one or more <a href="#BTS">BTSes</a>.
\r
106 <p><a NAME="BSIC"></a><b>BSIC</b> (<b>B</b>ase <b>S</b>tation <b>I</b>dentity <b>C</b>ode
\r
107 or <b>B</b>ase transceiver <b>S</b>tation <b>I</b>dentity <b>C</b>ode)
\r
108 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
109 <br>Unique ID number of each <a href="#BTS">BTS</a>. If we code this value binary, first three digits (in decimal format)
\r
110 are <a href="#BCC">BCC</a> and next three are <a href="#NCC">NCC</a>. These values range from 0 - 63.
\r
111 <b>BSIC</b> values can be found among others in <b><a href="faq_net2.htm#Menu2">test 2</a></b>.
\r
113 <p><a NAME="BTS"></a><b>BTS</b> (<b>B</b>ase <b>T</b>ransceiver <b>S</b>tation)
\r
114 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
115 <br>This device allows communication between phones and cellular network
\r
116 (many parameters, like current communication channel, distance to <b>BTS</b> and signal quality can be found, for example,
\r
117 in <b><a href="faq_net2.htm#Menu1">test 1</a></b>).
\r
119 <p>And here are another classes with maximum power of <b>BTS</b>:
\r
122 <table cellspacing=0 cellpadding=0 border=1>
\r
123 <tr><td><center><b>GSM 900</b></center></td><td><b>GSM 1800</b></td></tr>
\r
126 <center>320 W (55 dBm)<br>
\r
129 40 W (46 dBm)</center>
\r
137 <center>20 W (43 dBm)<br>
\r
140 2,5 W (34 dBm)</center>
\r
144 <p>In Polish version of this FAQ I give many links to WWW pages with <b>BTS</b> lists, their descriptions, pictures (in Poland).
\r
146 <p>From English pages I recommend <a href="http://www.geckobeach.com/cellular/cellpixs/cellid.htm">www.geckobeach.com/cellular/cellpixs/cellid.htm</a>
\r
147 site - it's about networks and <b>BTSes</b> in North America.
\r
149 <p>Another links connected with it:
\r
152 <li><a href=http://go.to/nokia.info>http://go.to/nokia.info</a> - photos of <b>BTSes</b></li>
\r
153 <li><a href=http://www.club.cz/nokia.monitor/>www.club.cz/nokia.monitor/</a>
\r
154 - <b>BTSes</b> bases for Czech networks</li>
\r
158 <p><p><a NAME="C1"></a><b>C1</b> (path loss-criterium)
\r
159 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
160 <br>This is a parameter (ranging from -99 to 99 dBm) calculated by the phone to decide which cells to use
\r
161 (it uses the cell only if its <b>C1</b> is positive). This value is based on:
\r
165 <li><a NAME="RX"></a><b>RX</b>
\r
166 <br>Strength of signal received in <a href="faq_net2.htm#BCCH">BCCH</a> channel. If it is equal or less than
\r
167 <a href="#RxLevAm">RxLevAm</a>, the phone searches for next
\r
168 <a href="faq_net2.htm#BCCH">BCCH</a> channel. It is shown in
\r
169 <b><a href="faq_net2.htm#Menu1">test 1</a></b> (for current channel)
\r
170 and also in <b><a href="faq_net2.htm#Menu3">test 3</a></b>, <b><a href="faq_net2.htm#Menu4">test 4</a></b>
\r
171 and <b><a href="faq_net2.htm#Menu5">test 5</a></b>
\r
172 (for neighbor channels). The amount of measurements of the quality of transmission with <a href="#BCCH">BCCH</a> channels
\r
173 in neighbor cells is given in <b><a href="faq_net5.htm#Menu62">test 62</a></b></li>
\r
175 <li><a NAME="RxLevAm"></a><b>RxLevAm</b> (<b>Rx</b> <b>Lev</b>el <b>A</b>ccess <b>m</b>inimum)
\r
176 <br>Min. level of the received signal (usually from -100 dBm to -110 dBm) needed by the phone to use particular cell.</li>
\r
178 <li><a NAME="MSTxPwr"></a><b>MSTxPwr</b>
\r
179 <br>Max power, which can be transmitted by phone to get access to
\r
180 <a href="faq_net2.htm#RACH">RACH</a> channel (i.e. max power allowed by current cell).
\r
181 Actually, it is lower in towns (where cells are small) and higher outside them.
\r
184 <li><a NAME="MSMaxTxPwr"></a><b>MSMaxTxPwr</b>
\r
185 <br>Max permissible transmission power of the phone (its classes are described in
\r
186 <a href="faq_net2.htm#TX">TX description</a>).</li></ul>
\r
188 <p>It is calculated using following formula:
\r
189 <nobr>C1 = (<a href="#RX">RX</a> - <a href="#RxLevAm">RxLevAm</a> - MAX ( ( <a href="#MSTxPwr">MSTxPwr</a>
\r
190 - <a href="#MSMaxTxPwr">MSMaxTxPwr</a> ), 0) ) </nobr>, where MAX(x,y) is obviously a mathematical
\r
191 function giving the bigger one of the discussed numbers.
\r
192 The phone shows <b>C1</b> value in <b><a href="faq_net2.htm#Menu1">test 1</a></b> (for current channel) and in
\r
193 <b><a href="faq_net2.htm#Menu3">test 3</a></b>, <b><a href="faq_net2.htm#Menu4">test 4</a></b>
\r
194 and <b><a href="faq_net2.htm#Menu5">test 5</a></b>
\r
195 (for neighbor channels).
\r
197 <p><a NAME="C2"></a><b>C2</b> (cell-reselection criterion)
\r
198 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
199 <br>This parameter (-99 to 99 dBm) is calculated with following formula:
\r
200 <nobr>C2 = C1 + <a href="#CellReselect">Cell reselect
\r
201 offset</a> - <a href="#TemporaryOffset">Temporary offset</a>
\r
202 * H (<a href="#PenaltyTime">Penalty time</a> - T)</nobr>.
\r
203 If this value for some other cell (<b>C2</b> for
\r
204 neighbor channels can be found in <b><a href="faq_net2.htm#Menu3">test 3</a></b>,
\r
205 <b><a href="faq_net2.htm#Menu4">test 4</a></b> and
\r
206 <b><a href="faq_net2.htm#Menu5">test 5</a></b>) is higher than this value for current cell
\r
207 (shown in <b><a href="faq_net2.htm#Menu1">test 1</a></b> and <b><a href="faq_net2.htm#Menu3">test 3</a></b>)
\r
208 for a period of time longer than 5 seconds, the phone switches cells. There are two exceptions to the rule:
\r
212 <li>if the new cell is located on different
\91Location Area (this parameter for current cell can be checked in
\r
213 <b><a href="faq_net3.htm#Menu11">test 11</a></b>), <b>C2</b> for this cell must be (during more than 5 seconds)
\r
214 higher than <b>C2</b>+CELL_RESELECT_HYSTERESIS for old cell (where CELL_RESELECT_HYSTERESIS is a
\r
215 special parameter sent in <a href="faq_net2.htm#BCCH">BCCH</a> channel).</li>
\r
217 <li>if the phone switched cells during last 15 seconds, <b>C2</b> for a new cell must be higher at least 5 dBm from
\r
218 <b>C2</b> value of the old cell.
\r
222 <p>H(x) function for currently not used cells is 0 (if x<0) or 1 (if x>=0). For current cell H(x) is always equal 0.
\r
223 <br>By a skillful manipulation of this parameter (through CELL_RESELECT_HYSTERESIS), operators can direct
\r
224 connections to specific cells (thus lightening load of the network).
\r
226 <p><a name="CDMA"></a><b>CDMA</b> (<b>C</b>ode <b>D</b>ivision <b>M</b>ultiple <b>A</b>ccess; also known as IS-95)
\r
227 <br>One of the newer digital technologies in 800 or 1900 Mhz. Used in North America, Australia and some southeastern Asian countries
\r
228 (e.g. Hong Kong and South Korea). It doesn't divide the radio frequency
\r
229 spectrum into separate user channels by frequency slices or time slots, but
\r
230 separates users by assigning them digital codes within the same broad spectrum.
\r
232 <p><a NAME="DCCH"></a><b>DCCH</b> (<b>D</b>igital <b>C</b>ontrol <b>Ch</b>annel)
\r
233 <font size=-2>(TDMA 800/TDMA 1900)</font>
\r
235 <p><a NAME="DCS"></a><b>DCS</b> (<b>D</b>igital <b>C</b>ellular <b>S</b>ystem)
\r
236 <br>Cellular communication system working in 1800 MHz frequency band
\r
237 (currently more often called GSM 1800)
\96 a changed version of <a href="#GSM">GSM</a> (900 MHz) system.
\r
238 Its new features allowed to increase network capacity (that
\92s why this system is used in urban areas with huge number
\r
239 of subscribers) at the cost of thick net of the base stations (<a href="#BTS">BTSes</a>)
\r
240 and to provide roaming within one country. GSM 1800 has different channel numbers
\r
241 (see <b><a href="faq_net3.htm#Menu17">test 17</a></b>), different phone
\r
242 (see <a href="faq_net2.htm#RX">RX description</a>) and <a href="#BTS">BTSes</a>
\r
243 transmission power and also different max speed of the user, at which he can use his phone
\r
244 (250 km/h in GSM and 130 km/h in DCS).
\r
246 <p><a NAME="DSP"></a><b>DSP</b> (<b>D</b>igital <b>S</b>ignal <b>P</b>rocessor)
\r
247 <br>Signal processor (digital signals processing chip - controls radio interface and speech coding/decoding).
\r
248 Its version can be checked in <b><a href="faq_net5.htm#Menu88">test 88</a></b>.
\r
250 <p><a NAME="DTCH"></a><b>DTCH</b> (<b>D</b>igital <b>T</b>raffic <b>Ch</b>annel)
\r
251 <font size=-2>(TDMA 800/TDMA 1900)</font>
\r
253 <p><a NAME="DTX"></a><b>DTX</b> (<b>D</b>iscontinous <b>T</b>ransmission E<b>x</b>change)
\r
254 <br>Some phones and networks "care" ;-) about battery life using so called discontinuous transmission (DTX),
\r
255 which turns off phone
\92s transmitter when we don
\92t talk (but
\96 for example - listen to the calling party).
\r
256 During that period the phone generates a so called comfortable :-) noise, because if our interlocutor heard the silence,
\r
257 he could think that the connection was broken.
\r
259 <p><font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>:
\r
260 <br><b>DTX</b> must be supported by the phone (Nokia does - see
\r
261 <b><a href="faq_net5.htm#Menu78">test 78</a></b>) and <a href="#BTS">BTS</a> - you can check and
\r
262 (sometimes) change this in <b><a href="faq_net3.htm#Menu12">test 12</a></b> and
\r
263 <b><a href="faq_net3.htm#Menu13">test 13</a></b>.
\r
265 <p><a NAME="FDMA"></a><b>FDMA</b> (<b>F</b>requency <b>D</b>ivision <b>M</b>ultiple <b>A</b>ccess)
\r
266 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
267 <br>This name means multiaccess on frequency field: transmission proceeds on different frequencies at the same time
\r
268 (this is a "full duplex" connection): there is a
\93down-link
\94 from <a href="#BTS">BTS</a> to the phone and
\r
269 \93up-link
\94 - from the phone to <a href="#BTS">BTS</a> (this is called "up" and "down" because <a href="#BTS">BTS</a>
\r
270 antennas are usually higher than phone ones, so the signal from <a href="#BTS">BTS</a> to the phone
\r
271 really must go down (and vice versa)).
\r
273 <p><a NAME="Hopping"></a><b>Frequency hopping</b> (channel hopping)
\r
274 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
275 <br>During connection your phone can continuously change used frequency (used channel) in communication with cell.
\r
276 It's used, when some channel is still troubled - without <b>channel hopping</b>
\r
277 communication with phone could not be possible, with it it's - only this
\r
278 part of transmition, which is made on this frequency, is lost (so, if gives less number of
\r
279 signal loss, but doesn't change sound quality - methods of coding it are always
\r
280 the same). You can check (during a call) if your phone uses this function in
\r
281 <b><a href="faq_net2.htm#Menu1">test 1</a></b>. <b><a href="faq_net3.htm#Menu12">test 12</a></b> informs
\r
282 if it is allowed by the cell (these values are updated only during a call). <b>Channel hopping</b> requires
\r
283 Hopping Sequence Number (frenquencies are changed according to known for phone and network sequence)
\r
284 - see <b><a href="faq_net2.htm#Menu2">test 2</a></b>.
\r
286 <p><a NAME="GSM"></a><b>GSM</b> (<b>G</b>lobal <b>S</b>ystem for <b>M</b>obile Communication)
\r
287 <br>Cellular telecommunication system working at 900 MHz. It also has a 1800 MHz (<a href="#DCS">DCS</a>) and
\r
288 1900 MHz (PCS) version.
\r
290 <p><a NAME="HLR"></a><b>HLR</b> (<b>H</b>ome <b>L</b>ocation <b>R</b>egister)
\r
291 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
292 <br>Network register containing information about subscribers (i.e. about their subscribed services,
\r
293 tariff, last network they were logged in, etc.).
\r
295 <p><a NAME="IMEI"></a><b>IMEI</b> (<b>I</b>nternational <b>M</b>obile <b>E</b>quipment <b>I</b>dentification code)
\r
296 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
297 <br>Unique 15-digit identification number of every <a href="#GSM">GSM</a> phone on the world. It can be checked using <b>*#06#</b> code
\r
298 (all phones) or in service menu (Nokia), which can be activated by typing a code <b>*#WAR0ANTY#</b> or
\r
299 <b>*#WARRANTY#</b> (Nokia 6130). In Nokia 3110 after entering service menu (<b>*#WAR0ANTY#</b>)
\r
300 you have to additionally enter a code <b>9268</b>. <b>IMEI</b> contains information about the manufacturer,
\r
301 place of production and serial number (check <a href="http://www.tele-servizi.com/janus/texts/imei.txt">www.tele-servizi.com/janus/texts/imei.txt</a>
\r
302 for such list for Motorola phones,
\r
303 <a href=../firmware/firmware.htm>here</a> is my list for Nokia phones).
\r
304 Operators can restrict network access for particular phones
\96 for example the stolen ones
\r
305 (identified using <b>IMEI</b> number). Different operators can exchange such lists too.
\r
307 <p><a NAME="IMSI"></a><b>IMSI</b> (<b>I</b>nternational <b>M</b>obile <b>S</b>ubscriber <b>I</b>dentify)
\r
308 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
309 <br>Unique (max 15-digit) number given to the phone:
\r
313 <li>first three digits are <a href="faq_net2.htm#MCC">MCC</a></li>
\r
314 <li>next three digits are <a href="faq_net2.htm#MNC">MNC</a></li>
\r
315 <li>the rest is a unique number</li>
\r
318 <p><a NAME="IMSIattach"></a><b>IMSI attach</b>
\r
319 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
320 <br>It is a procedure executed after each power on. The phone informs network that it is active (and is ready for communication
\r
321 - receiving waiting SMS, etc.) and then it receives the <a href="#IMSI">IMSI</a> number.
\r
322 The counter connected with <b>IMSI attach</b> is located in <b><a href="faq_net5.htm#Menu64">test 64</a></b>,
\r
323 <b><a href="faq_net2.htm#Menu7">test 7</a></b> informs whether this is allowed by the current cell.
\r
325 <p><a NAME="IMSIdetach"></a><b>IMSI detach</b>
\r
326 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
327 <br>The phone informs network that it is going to switch off and the communication won
\92t be possible
\r
328 (its <a href="#IMSI">IMSI</a> expires). The counter connected with <b>IMSI detach</b> is located in
\r
329 <b><a href="faq_net5.htm#Menu64">test 64</a></b>. <b><a href="faq_net2.htm#Menu7">test 7</a></b>
\r
330 informs whether this is allowed by the current cell.
\r
332 <p><a NAME="LocationUpdate"></a><b>Location Update</b>
\r
333 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
334 <br>Every <a href="#GSM">GSM</a> phone periodically informs network about its current location.
\r
335 This function is called <b>Location Update</b>. It is executed after changing <b>Location Area</b> (phone makes
\r
336 it "intelligent" - when it's moved out of network coverage and the logs again to the network, makes <b>Location Update</b>
\r
337 only when current <a href="faq_net1.htm#BTS">BTS</a> has different LAC than previous one
\96 before losing the signal) or
\r
338 <a href="#PLMN">PLMN</a> (after leaving the range of one network and trying to log in to another).
\r
339 Then information about <b>Location Update</b> is transferred to a new <a href="#MSC">MSC</a>/<a href="#VLR">VLR</a>,
\r
340 which in turn passes this information to <a href="#HLR">HLR</a>. When the phone works in new
\r
341 <a href="#MSC">MSC</a>/<a href="#VLR">VLR</a>, <a href="#HLR">HLR</a> doesn
\92t identify the user by
\r
342 the number received from old <a href="#MSC">MSC</a>/<a href="#VLR">VLR</a> anymore. <b>Location Update</b>
\r
343 has a couple of varieties: <a href="#PLU">PLU</a>, <a href="#IMSIattach">IMSI attach</a> and <a href="#IMSIdetach">IMSI detach</a>
\r
344 (they're distinquished in <b><a href="faq_net5.htm#Menu64">test 64</a></b>). Current Location Area code can be checked in
\r
345 <b><a href="faq_net3.htm#Menu11">test 11</a></b>.
\r
347 <p><a NAME="MCU"></a><b>MCU</b> (<b>M</b>aster <b>C</b>ontrol <b>U</b>nit processor)
\r
348 <br>Main processor in phone.
\r
350 <p><a NAME="MSC"></a><b>MSC</b> (<b>M</b>obile <b>S</b>witching <b>C</b>enter)
\r
351 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
352 <br>Part of the system responsible for communication between subscribers and other users (also from other networks).
\r
354 <p><a NAME="NCC"></a><b>NCC</b> (<b>N</b>ational <b>C</b>olor <b>C</b>ode or <b>N</b>etwork <b>C</b>olor <b>C</b>ode)
\r
355 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
356 <br>3-bit number (from 0-7 range) used to differentiate cells of the operators from different countries
\r
357 (for example near the border, where the phone is in range of several different networks) transmitting using
\r
358 <a href="faq_net2.htm#BCCH">BCCH</a> in the same <a href="#FDMA">FDMA</a> channel. This number is constant
\r
359 within <a href="#PLMN">PLMN</a>. It is given in <a href="#BSIC">BSIC</a> of every <a href="#BTS">BTS</a>
\r
360 (you can check it in <b><a href="faq_net2.htm#Menu2">test 2</a></b>).
\r
362 <p><a NAME="PLMN"></a><b>PLMN</b> (<b>P</b>ublic <b>L</b>and <b>M</b>obile <b>N</b>etwork)
\r
363 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
364 <br>Area covered by one operator (one network). After changing this area, the phone executes
\r
365 <a href="#LocationUpdate">Location Update</a>.
\r
369 <li>Coverage maps of different operators worldwide can be found at <a href="http://www.subcam.freeserve.co.uk/mark/orange/ora.html">www.subcam.freeserve.co.uk/mark/orange/ora.html</a>.</li>
\r
372 <p><a NAME="PLU"></a><b>PLU </b>(<b>P</b>eriodic <b>L</b>ocation <b>U</b>pdate)
\r
373 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
374 <br>The phone informs network, on which country area (in the range of which cells) it is located.
\r
375 This procedure is executed periodically (depending on the network, for example in polish
\r
376 <a href="http://www.eragsm.pl/">Era GSM</a> and
\r
377 <a href="http://www.plusgsm.pl/">Plus GSM</a> networks every 3rd hour, in
\r
378 <a href="http://www.idea.centertel.pl/">Idea</a> every 2th hour)
\r
379 - this can be checked in <b><a href="faq_net3.htm#Menu10">test 10</a></b>. This period is counted from the
\r
380 last
\84contact
\94 with network (the counter doesn
\92t stop even if the phone loses network signal!)
\96 from the last call, sending/receiving
\r
381 SMS, requesting some services (for example enabling call diverting), because the network is then informed about phone
\92s
\r
382 location (but this is not registered in <b><a href="faq_net5.htm#Menu64">test 64</a></b>).
\r
383 The counter connected with <b>PLU</b> is in <b><a href="faq_net5.htm#Menu64">test 64</a></b>.
\r
385 <p><a NAME="TCH"></a><b>TCH</b> (<b>T</b>raffic <b>Ch</b>annels)
\r
386 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
387 <br>Two way user data (computer data or digitized voice) channels. They can be divided to:
\r
391 <a NAME="HR"></a><b>HR</b> (<b>H</b>alf <b>R</b>ate Traffic): max data transfer rate is 6.5 kbit/sec (introduced in
\r
392 GSM phase 2). <b>HR</b> channels offer worse sound quality but also longer phone standby time (even up to 30%),
\r
393 because the phone using <b>HR</b> uses less power. The main advantage of this kind of channels is that they
\r
394 enable the network to double its capacity (the number of subscribers able to make a call at the same time
\96 see
\r
395 <a href="#TS">TS parameter</a> description for more details) or to double the max range of the
\r
396 <a href="#BTS">BTS</a>. Using these channels must be allowed and supported by the network (this can be
\r
397 checked in <b><a href="faq_net2.htm#Menu7">test 7</a></b>) and the phone. Activation code is
\r
398 <b>*HRC0#</b>, deactivation code is <b>#HRC0#</b>. Unfortunately, not all Nokia phones accept these codes
\r
399 (the phone should reset itself after entering them)
\96 in older models they're not supported, in never they're deactivated, when
\r
400 the phone is directed to countries with networks, which doesn't support it.
\r
401 Interesting fact is that in Nokia 6110 (firmware 5.24) you can decide whether the phone can use this channel or not by modifying
\r
402 following EEPROM memory cells values:
\r
404 <table BORDER CELLSPACING=0 CELLPADDING=0>
\r
406 <td ALIGN=CENTER><b>enabling</b></td>
\r
408 <td ALIGN=CENTER><b>disabling</b></td>
\r
412 <td ALIGN=CENTER>cell 0070 value for 78
\r
413 <br>cell 011F value for 84</td>
\r
415 <td ALIGN=CENTER>cell 0070 value for 70
\r
416 <br>cell 011F value for 7C</td>
\r
422 <a NAME="FR"></a><b>FR</b> (<b>F</b>ull <b>R</b>ate Traffic):transmission at 13 kbit/sec, coding using
\r
423 LPC-RPE (<b>L</b>inear <b>P</b>rediction <b>C</b>oding with <b>R</b>egular <b>P</b>ulse <b>E</b>xcitation) algorithm</li>
\r
426 <a NAME="EFR"></a><b>EFR</b> (<b>E</b>nhanced <b>F</b>ull <b>R</b>ate):
\r
427 13 kbit/sek, coding algorithm different than in <a href="#FR">FR</a> (ASELP (AlgebraicCode Excitation Linear Prediction)
\r
428 created by <a href="http://www.nokia.com">Nokia</a> and Sherbrooke University; recognized as an industrial standard for
\r
429 <a href="#GSM">GSM</a>). <b>EFR</b> provides better sound quality at the same data transmission rate (and up to 5%
\r
430 faster battery drain compared to <a href="#FR">FR</a>). This mode can be enabled using
\r
431 <b>*EFR0#</b> code (the phone then tries to use <b>TCH</b> channels in following order: <b>EFR</b>, <b>FR</b>,
\r
432 (<b>HR</b>)) and disabled with <b>#EFR0#</b> (order: <b>FR</b>, (<b>HR</b>)). These codes may be not recognized
\r
433 by some models (for example 6110 with some firmware versions) -
\r
434 if your phone accepts them, it should reset itself right after typing them
\r
435 (if this doesn
\92t happen, you won
\92t be able to enable/disable <b>EFR</b> using a keyboard code).
\r
436 This channel is not supported in all older models (for example, 2110).
\r
437 The type of channel used by your phone can be checked only during connection.
\r
441 <p>When you network doesn't support one of these channel and phone recognizes its activation code, you may see
\r
442 "Not ready" message.
\r
444 <p>You can check this in <b><a href="faq_net2.htm#Menu1">test 1</a></b>.
\r
445 The sequence of <b>TCH</b> channels can be freely set using some of the service programs
\r
446 (for example WinTesla
\96 in Software/Product Profile menu) - it can be only possibility to enable <b>HR</b> channel in phone.
\r
448 <p><a name="TDMA"></a><b>TDMA</b> (<b>T</b>ime <b>D</b>ivision <b>M</b>ultiple <b>A</b>ccess)
\r
449 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
450 <br>This means multiaccess in time: several phones can transmit signal (either digitized voice or computer data) in the
\r
451 same time on the same channel (its number can be checked in <b><a href="faq_net2.htm#Menu1">test 1</a></b>)
\96\r
452 actually, this period of time is divided into very small parts (see <a href="#TS">TS description</a>),
\r
453 invisible for us, so we can assume it happens simultaneously).
\r
455 <p><a name="TMSI"></a><b>TMSI</b> (<b>T</b>emporary <b>M</b>obile <b>S</b>ubscriber <b>I</b>dentity):
\r
456 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
457 <br>During signalization procedures encrypted on radio channel
\r
458 (for example, during location update) this number is assigned by
\r
459 <a href="#MSC">MSC</a> to phone. In the moment, when network wants to contact
\r
460 with concrete phone and transmission on radio channel is not encrypted, it's send
\r
461 instead of <a href="#IMSI">IMSI</a> and allows phone to indentify, that concrete
\r
462 call concern on it. It doesn't have global meaning
\r
463 and it's structure is definited by network administrator. Actual <b>TMSI</b>
\r
464 you can check in <a href="faq_net3.htm#Menu10">test 10</a>.
\r
466 <p><a NAME="TS"></a><b>TS</b> (<b>T</b>ime <b>S</b>lot)
\r
467 <br>Each radio channel used in communication between phone and
\r
468 <a href="#BTS">BTS</a> is divided into 8 parts (called TS - time slots). If in all <a href="#BTS">BTSes</a>
\r
469 (available for your phone) all time slots are in use, you won't be able to make/receive a call and you'll get a 'Network busy'
\r
470 message (information about reason of connection failure is given among others in
\r
471 <b><a href="faq_net4.htm#Menu39">test 39</a></b>). Unfortunately, each type of connection has the same priority in
\r
472 networks not supporting GSM Phase 2+ (it isn't available in older GSM Phases) - so if you want to dial emergency number 112
\r
473 and the network is busy, no other call will be interrupted and you won't get connected. This problem can also be solved by
\r
474 adding more <a href="#BTS">BTSes</a> (for example in dual GSM 900/1800 MHz network) or by modifying
\r
475 current stations to allow the use of <a href="#HR">HR</a> channels (<a href="#FR">FR</a>
\r
476 and <a href="#EFR">EFR</a> transmission uses whole assigned time slot, while <a href="#HR">HR</a>
\r
477 (defined in GSM Phase 2) only half of it). Max data transmission speed using one <b>TS</b> is 9.6 kbit/sec (or 14.4 kbit/sec,
\r
478 but only in some additional conditions). There are new systems allowing higher transmission speeds
\r
479 (for example GPRS (<b>G</b>eneric <b>P</b>acket <b>R</b>adio <b>S</b>ervices) or HSCSD
\r
480 (<b>H</b>igh <b>S</b>peed <b>C</b>ircuit <b>S</b>witched <b>D</b>ata), but they achieve this using several time slots
\r
481 at the same time (which decreases network capacity). Actual used <b>TS</b> can be checked
\r
482 in <a href=faq_net2.htm#Menu1>test 1</a>, in phones with <b>HSCSD</b> (like Nokia 6210)
\r
483 use also <a href=faq_net3.htm#Menu8>test 8</a> for it...
\r
485 <p><a NAME="VLR"></a><b>VLR</b> (<b>V</b>isitor <b>L</b>ocation <b>R</b>egister)
\r
486 <font size=-2>(<a href="#GSM">GSM</a>/<a href="#DCS">DCS</a>/PCS)</font>
\r
487 <br>This register contains the same data as <a href="#HLR">HLR</a>, but for roaming guests
\r
488 (their data are taken from their home network <a href="#HLR">HLR</a>).
\r
490 <font class="drukuj">
\r
491 <p><a class="shref" href="#Top"><small><em>Back to the top</em></small></a><br>
\r
494 <p><a href="faq_net0.htm">[Part 1]</a><b>[Part 2]</b><a href="faq_net2.htm">[Part 3]</a><a href="faq_net3.htm">[Part 4]</a><a href="faq_net4.htm">[Part 5]</a><a href="faq_net5.htm">[Part 6]</a><a href="faq_net6.htm">[Part 7]</a>
\r
496 <hr size="2" noshade width="60%" align="center" style="color: #004080">
\r
499 <br><p align="RIGHT"><font class='autor' size='1'><a class="autoremail" href="mailto:Marcin Wiacek<Marcin-Wiacek@topnet.pl>">Marcin Wiacek</a> (<a class="autoremail" href="http://marcin-wiacek.topnet.pl">WWW</a>)
\r
500 <br>Last modification: 5 January 2002</font>
\r
git://git.jankratochvil.net / gnokii.git / blob