V2.95 16-02-00
V3.00 16-08-00
V3.01 21-08-00
BUGS (NEWER TOO ?):
-
Sporadic vibrating during SMS receiving or calling although the vibration
was switched off
-
Call waiting service (Menu 4-3-4) doesn't work correctly (it should
"Requests the network to send a beep during a call when another call is
coming"). When use profile Meeting (with Incoming call alert = Beep once),
during call can hear beep and phone is vibrating when another call is coming.
But with another setup of "Incoming call alert" there isn't beep. Only
on display another call is flashing.
Temporary solution: Callers group have own icons. If you turn off showing
icons, auditible signaling is OK. Other solution is to put off number from
caller group
-
When profile is switched to "Meeting" where is "Incoming call alert" switched
to "Beep once", don't hear beep during call when battery is low and double
beep when battery is empty. Phone turn off unawares.
-
When "Delivery reports (1-8-5)" is switched to "on" and phone receives
a delivery report, menu item "Games-Settings (6-4)" disappears. It is showed
again when turn off and turn on phone.
-
When keypad is locked and you put phone into carkit, keypad is active.
When take it from carkit then, it's sometimes locked again, sometimes not.
-
When phone is in the carkit, you can sometimes lock keypad
-
When you take from carkit phone with locked keypad, very often can't unlock
keypad and you have to restart phone
-
In Polish language in Menu 5 ("Call diverts") there two the same
submenus (3 and 5) "Divert when not answered" with different contenst
-
When for example you received a SMS, when you unlock the phone's keypad,
you must wait till you see "1 message received" before you can push 'read'.
Otherwise you'll go to the menu.
-
When you enable cell-info, you won't see any info anymore about which profile
you're in.
-
Sometimes, when receive SMS and starts to read it, you have info "menu
contains...." (help for Inbox menu)
SOME OLDER VERSIONS HAD BUG: sometimes the phone couldn't show the
names of the person whose calling eventhough the person's name IS on the
phonebook. So instead of showing the caller's name the phone was only showing
"+62.... call"
BUG (all version ?):
-
Dropping the last character of the domain name when using relative URLs!
Example: A link like /cgi-bin/wap_news.pl on a page http://www.wapterror.de/wml/index.wml
sould be constructed as http://www.wapterror.de/cgi-bin/wap_news.pl.
Phone makes it http://www.wapterror.d/cgi-bin/wap_news.pl (missing
e on .de)
-
Can't delete templates of SMS and Picture Images
-
Sometimes, even when vibra is disabled in profile, it enables
-
DTMF doesn't work , when have enabled keypad tones
-
Phone sometimes doesn't want to connect to WAP (message "check settings")
-
If you assigned downloaded ringtone for caller group and deleted if (ringtone)
from phone, it stops ring and vibrate. Can't change ringtone from phone's
menu then (must use Logo Manager or different software)
V3.04 (16-10-00 ????)
-
Improved Half Rate audio quality
-
Updated operator list
V3.08
-
(V3.04) Improvement to Arabic/Hebrew Memory status layouts
-
(V3.04) Improvements to Voicetags
-
(V3.04) Improvements to SMS
-
(V3.04) Only one indicator is at the end of Selection window when moving
to second candidate first time in the editing mode
-
(V3.04) Input method indicator in top left corner is disappeared in Rename
operation
-
(V3.04) DLR-3 is detected as a headset after one headset call
-
(V3.04) UNICODESIM: SDN only names of length less than 8 are shown
-
(V3.04) Improvements to browser setup: \"Menu\" -> \"2\" -> \"Scroll\"
corrected
V3.74 22-09-00
V4.04 06-10-00
BUG (NEWER TOO ?): Make these steps:
-
create new folder in Messages/My folders
-
create message and move to this folder
-
enter into this folder
-
edit this message
-
save it
You can't now enter to any folder. Must restart phone. Note, that bug exist
only, if this folder is first on the folders' list. For other it's OK.
V4.08 25-10-00
V4.27 21-12-00
-
Turkish, Greek, Czech and Polish T9 added
-
Spanish language and T9 added
-
LCD temperature compensation
-
LCD reset after powerup
-
Spaces couldn't be put in front of text in Dealer Welcome Note (DWN)
-
PIN-code couldn't be entered on a SIM-locked phone
-
It wasn't possible to call a SS string beginning with a "*" (e.g. *#61#
etc.) stored on the FDN phonebook
-
Setup Menu command was not executed when already in SIM ATK menu
-
SIM ATK minimum polling interval increased from 5 to 10 sec
-
Improvements when trying to enter username in HTTP authentication
-
Dynamic text case handling improved
-
OPERATOR_NAME_MAX_LENGTH changed from 10 to 11
-
Timeout killer didn't work on *+-key in number queries
-
Games 'options' -menu disappeared when deleting delivery report in messages
-
Missing/strange menu items when sending SMS
-
Improvements to Arabic & Hebrew editor options
-
Letter insertion direction change in Arabic
-
Improvements to Arabic & Hebrew input (wrong ui-text was used for special
characters)
-
Improvements to calendar when using fetch service with birthday note
-
Improvements when selecting Multiple copies
-
In SMS: Improvements when storing more than 50 items in the Template folder
-
Improved functionality in Names-list
-
If T9 is active '#'-key toggles now between T9 and normal input in Arabic/Hebrew
and Chinese languages
-
Improved business card sending
-
No characters were received if Euro-sign was first character in a picture
message
-
Improvements to Voice tag
-
Correction of Arabic Name & Number view, RTL marker inserted
-
Correction of number length for Idle number input
-
Bottom margin changed in Arabic editor from '2' to '1'
BUGS:
-
PL specific: brak informacji o wolnej pamięci telefonu (widać tylko "Wolne:
")
-
After enabling phone, entering PIN code (after "Enter PIN code" request)
and when you will see network indicator, press many times (very fast) phone's
keys (Red and Green key). You should see "Emergency calls only". It must
done so fast, that Stop sign doesn't blink. If you don't see startup logo:
phone doesn't give access to phone's menu and profiles, although it's logged
into network.
-
when keypad is locked and you will press any key, you will see "Press Menu
and then *". You can now press longer Power button and phone will disable
!
-
when you make something, somebody call to you and you will press left soft
key, phone hangs after receiving call...
-
sometimes after WAP session you can't lock keypad
-
after using Irda can't receive SMS
-
using BTS Test in netmonitor can
damage phone (CONTACT SERVICE, etc.) !
V4.36 31-01-01
-
Handling of operator logo length improved
-
AT commands updated
-
Initialisation of Data SW when receiving/releasing the data switch
-
Fixed Dialling Numbers - View details shows wrong number if it is longer
than 12 digits. Although SSC-String for call forwarding is on FDN list,
call forwarding can not be performed either via menu or via string
-
Flashing panel when erasing a phonebook item
-
Impossible to call to SMS 'use number'
-
Delayed SMS
-
SMS Delivery reports
-
Wrong indication of max characters in SMS
-
Font size selection not working for received SMS
-
Error in DLR-3 usage in the middle of the IR usage
-
Modified AT commands for DHU functionality (TCH Loopback)
-
Automatic answer does not work in car profile
-
Some spelling in languages improved
-
Call without simcard, note "Emergency calls only" won't disappear
-
Freezes when faulty Business Card is received
-
Possible to switch phone off during keypad is locked
-
Updated MoU list (DUAL_operators) (Operator Cosmorom)
-
SIM ATK: submenus become trash
-
Cancel all CF's at once:
-
Performed on Line1: If CFU for Line2 is activated the sign is deleted too
-
Performed on Line2: CF's for Line1, data and fax are cancelled: Line2 not
affected
-
*#06# should show IMEI even when SIM card is not inserted
-
USSD short strings supported
-
STP support (e.g. used in Mercedes)
-
CLI logo over IR send/receive
-
Ringing tones over IR - receive
-
Shortcut on 'Send' for go to bookmark
Bug:
-
after ending Snake II game enter options and last view. When it will be
displayed, the light will be not off.
-
in German D2 Network problems with message receiving (after receiving one
no more are received).
(?) Improvements in netmonitor
V5.01 15-03-01
-
The first WAP call cometimes fails after answering/missing a MT PSTN call
-
When trying to delete a received picture message the phone sometimes freezes
-
When erasing unread SMS from phone by cable or IrDA, SMS icon stays on
display
-
Added function for UI to check, if Data cable is connected or not
This version can cause following intermittent errors:
-
Divert freezes the phone
-
SMS receive freezes the phone when reading
-
SMS editing freezes the phone
V5.02 02-04-01
All changes from V4.36
-
(?) first three changes available in 5.01
-
Not possible to change the date of the calendar
-
DTMF tones stop working during call
-
Memory overwrite when using Russian text
-
When PC Suite changes the profile name it is not updated to phone UI before
restarting the phone
-
Strange behaviour when entering number and then <SEND> to PIN query
in start-up
-
By HSCSD data transfer is flow ctrl problems (data loss by upload and bi-directional)
-
The first WAP call sometimes fails after answering/missing a MT PSTN call
-
When trying to delete a received picture message the phone hangs
-
When erasing unread SMS from phone by cable or IrDA, SMS icon stays in
UI
-
Wrong font used for emergency call
-
Sometimes when phone is set to local mode (e.g. by WinTesla) the phonebook
server is not initialised. This makes it impossible to store CLI icons
-
Not possible to insert new words to the dictionary, if phone SW has been
updated to 4.27
-
Business card received over IR handled as a Ringing tone
-
Speed dial not updated, if a SIM card entry's number is edited to NULL
-
SMS Notifications are not routed to PC Suite
-
Bluetooth implemented (there is also special hardware "Nokia Connectivity
Pack" required for it !)
-
Added support in the IrDA subsystem for sending CLI logos to Nokia 6110
Observations from users (V4.36):
-
new parameter in test 8 in netmonitor
-
when create note in calendar, default year is 2001 (not 2000)
-
PL: zmieniona nazwa dla Menu 5-5. Wcześniej "kiedy nie odbieram",
teraz "kiedy niedostępny"
-
BUG: when send SMS using phone memory (it should be empty), before receiving
report, you have strange chars inside...
-
"ERA GSM" changed to "PL ERA GSM"
Note: The correction for line 2 icon (mainly seen in UK and Ireland), which
was implemented in 5.01, is not implemented in 5.02
V5.17 01-06-01
V5.17 05-07-01 (ROM6?)
-
Added support for Package M - Telekom Jingle - Operator specific ringing
tone
-
Changed language name spelling of Ukrainian language menu select
-
Operators language files updated.
-
Use one sort order for all languages in Q and S pack. Still problem with
the letter "Q" in language pack Q!
-
Startup texts/graphics priority changed to: 1 User Welcome Note Text, 2
Dealer Welcome Note Text, 3 User Welcome Note Graphics.
-
A "DDI Call Create" message on the Fbus (typically used in STP) cause 6210
SW crash.
-
When a busy number was called twice the third CALL_CREATE_REQ is not responded
in any way
-
Resets with WAP browsing and bookmark operations
-
Strange behaviour when entering number +SEND to PIN query in startup
-
Wrong font used for DTMF numbers when call is accepted. Now corrected to
bold 8pt.
-
An unknown DTMF tone is sent at the pause when using carkit.
-
TWIN-BILL SIM Causes "SIM REJECTED" Error message when entering wrong PIN
code.
-
Heavy load of phone entries from AT command interface resets phone.
-
Incorrect sub_block length in PND_NAME_FIELD
-
Indications ordered from STP are not unsubscribed/cancelled when phone
is disconnected, causing garbage in data calls.
-
Wrong line 2 icon problem.
-
Car radio mute when voice dialling.
-
New features: WAP over USSD enabled.
Note: To restore WAP Bookmarks, WinTesla version 311.06.00 or later must
be used!
(V4.27) New netmonitor test
95 and 130 (for Bluetooth)
Note (probably for ALL firmware versions): light sometimes doesn't turn
on, when keypad is locked and power button pressed (like in older models).
For me is NOT BUG. It's rather feature, which allows to save some energy.
It happens (light doesn't enable), when:
-
keypad is locked
-
any key is pressed and "Press unlock and then *" or "Now press *" message
will disappear
-
power key is pressed
Press notice, that light is always enabled after pressing power key then,
when message "Press unlock and then *" or "Now press *" is displayed. Because
of it I think, it's good feature, which saves energy after accidentaly
pressing this key (when press fast any key and power button or fast double
power button, light is enabled).
BUG:
-
when change caller group data and set incorrect (not existing in this model)
ID for ringtone, it's not possible to change it from phone's menu. Bug
existing for example, when upload backup data made in other model to it.
-
when have "Pending" delivery report, phone shows different contents (with
"Pending" you have many strange chars)
-
PL specific: niedokładne tłumaczenie w pomocy do Menu 3 (wykrzystania)
and Menu 6 (opcja dla dwu graczy)
V5.27 01-08-01
-
Improvements on key lock in combination with car kit. Keyboard will now
lock correctly when removing the phone from car kit
-
Improved functionality when enabling frequency hopping
-
Improved speed for network search after power on, in a country different
from the one where the phone was turned off
-
Improvement to IR after sending a business card to 9110
-
Dealer Welcome Note remains after the user has restored factory settings
-
Improvement to SMS: pressing * in SMS options insert template does not
any more stick the menu
-
Voicetags improved restoring from PC
-
Improved Data Download via SMS Cell Broadcast
-
Call Barring service string accepts now an empty password
-
SS requesting disabled, when a SIM has not been inserted
-
Operator list updated:
-
New operators
-
"SPACETEL" (417/02)
-
"VUT SMILE" (541/01)
-
"GH-MOBITEL" (620/03)
-
"ORENSOT" (250/11)
-
"VODAFONE" (276/02)
-
"TR AYCELL" (286/04)
-
"CU/C_COM" (368/01)
-
"U-CALL" (539/01)
-
"GAB TELECEL" (628/02)
-
"CELLCO" (630/05)
-
"Digicel" (706/02)
-
Operator names changed
-
Old New
-
"Dutchtone" "Orange NL" (204/20)
-
"ERA GSM" "Era" (260/02)
-
"TH WCS" "TH ORANGE" (520/10)
-
New country name
Note 1: When flashing 05.27 into a phone, that has never been in service
in normal network (e.g. a swap phone or other brand-new phone), flashing
might not terminate correctly. This can be avoid by letting the phone to
go into service before flashing or by using a normal SIM card (not test
SIM) in the phone during flashing.
Note: To restore WAP Bookmarks, WinTesla version 311.06.00 or later
must be used!
V5.36
When flashing 05.36 into a phone that has NEVER BEEN IN SERVICE ON
A LIVE NETWORK (e.g. a swap phone or other brand new phones) the flashing
might not terminate correctly. The problem only occurs when using WinTesla
for flashing. A work around for this problem is to make the phone go into
service before flashing or having a live SIM in the phone while flashing.
In order to restore WAP Bookmarks, the latest WinTesla version (311.06.00)
must be used!
-
Changes to operator and country names:
-
New operator:
-
XFERA (214/04)
-
TELE2 (246/03)
-
MCM (262/13)
-
Quam (262/14)
-
SI VEGA 070 (293/70)
-
Telcell GSM (362/51)
-
UTS (362/91)
-
PK-UFONE (410/03)
-
SyriaTel (417/93)
-
DIGITEL (515/05)
-
ORANGE (520/99)
-
FSM Telecom (550/01)
-
OTA NET (603/02)
-
GAMCEL (607/01)
-
ECONET NG (621/20)
-
NG NITEL (621/40)
-
COG LIBERTIS (629/10)
-
MOBITEL - TZ (640/02)
-
CELTEL TZ (640/05)
-
Itineris RUN (647/00)
-
F-OMT (647/02)
-
Cell C (655/07)
-
PORT-HABLE (722/35)
-
Name changed:
-
AIRTEL -> E VODAFONE (214/0
-
Orange -> orange (228/03)
-
TDK-MOBIL -> TDC MOBIL (238/01)
-
mobilix -> Orange (238/30)
-
Q GSM -> TELE2 (248/03)
-
TELECEL -> P VODAFONE (268/01)
-
AMERIS -> F-Orange (340/01)
-
INA SPICE -> INA AIRTEL (404/31)
-
M.PLUS -> BATELCO (426/01)
-
DiGi 1800 -> DiGi (502/16)
-
EXCELCOM -> proXL (510/11)
-
ORANGE -> Orange (520/99)
-
OMEGA -> LoneStar (618/01)
-
CAMNET -> MTN CAM (624/01)
-
CELLCO -> CELLCO GSM (630/04)
-
Itineris RUN -> Orange re (647/00)
-
New country name:
-
NA (362)
-
PK (410)
-
FSM (550)
-
GMB (607)
-
ARG (722)
-
BRA (724)
-
Country name changed:
-
NIG -> NG (255)
-
NA -> ANT (362)
-
F -> REU (647)
-
Improper UI-disconnection of data cable causing IrDA to disconnect corrected.
-
Locked UI while in call on Mobilkom Austria network using A1 Plus SIM corrected.
-
Missing Chinese punctuation characters in WAP corrected.
-
Problem with Phone Book reading via AT commands corrected.
-
Problem with SMS indicator reading via AT commands corrected.
-
Chinese sorting in Phone Book when using the letter Q improved.
-
Wrong text in Call Cost Limit query corrected.
-
Problem with making calls from Name&Number display in Arabic corrected.
V5.44 29-11-01
-
Possibility of acoustic feedback from keypad and warning tones in HFU-2
reduced. Typically that feedback appeared when the car radio speakers were
used for phone audio
-
Handling of long numbers in the Abbreviated Dialling
-
Number list on SIM improved. The last digit of a very long number string
might have changed in some cases
V5.56 25-01-02
-
Improvement to Network Identity over the air in NITZ (Network Identity
and Time Zone)
Note:
-
after changing SIM card memory type is set to "SIM card". Correct it manually
or set security level to "phone" (when SIM card was used earlier, memory
type won't be changed).
-
after calling WAP WAP access number is added to Called Numbers
BUGS:
-
Menu shortcuts problem: Menu 1-8-x (example Menu 1-8-7) directs
to Menu 1-8-1
-
Shortcut Menu 2-5-1-1-1 hangs phone !
According to some WWW sites phone seems to work with firmware from
Nokia 6250. (The only ?) known problem is weak 1800Mhz coverage (probably
calibration info is saved in different place). I don't have any other info,
do not ask me. |