$Id$ Assembled by Balazs Nagy (js@lsc.hu) Alfred R. Nurnberger Hugh Blemings Mike Bradley Odinokov Serge Pavel Janik Pawel Kot Marcin Wiacek (Marcin-Wiacek@TOPNET.PL) ... and other members of gnokii mailing list and authors of some WWW pages. The data provided is for information purposes only. Some of the frames might be hazardous to your phone. Be careful!!! We do not take any responsibility or liability for damages, etc. NOTE: this information isn't (and can't be) complete. If you know anything about features not listed here or you noticed a bug in this list, please notify us via e-mail. Thank you. Document describing frames used in GSM/PCN Nokia 6110 and derivatives (Nokia 6130, 6150, 6190, 5110, 5130, 5150, 5190, 3210, 3310) Correct format is FBUS version 2/Direct IRDA/MBUS version 2 (see nokia.txt for protocol details): List: 0x00: Monitoring values r monitoring value {+0x01, 0x01, block... } where block: 0x5e, 0x05, 0x7a(?), 0xd0(?), 0x85(?), 0x02, percentHI, percentLO Battery percent level 0x5e, 0x0c, 0x52(?), 0x4b(?), 0x6f(?), 0x02, voltageHI, voltageLO Battery standby voltage ............ 0x01: Call Information s Make call { 0x0001, "number", type, block } where type: 0x01 - data call 0x05 - voice call block: data call (non digital lines): 0x02,0x01,0x05,0x81,0x01,0x00,0x00,0x01,0x02,0x0a, 0x07,0xa2,0x88,0x81,0x21,0x15,0x63,0xa8,0x00,0x00 data call (digital lines): 0x02,0x01,0x05,0x81,0x01,0x00,0x00,0x01,0x02,0x0a, 0x07,0xa1,0x88,0x89,0x21,0x15,0x63,0xa0,0x00,0x06, 0x88,0x90,0x21,0x48,0x40,0xbb voice call: 0x01, 0x01, 0x05, 0x81/0x00, sendnum, 0x00, 0x00, 0x01 where: sendnum (own number sending): 0x01: preset (depends on network) 0x03: on 0x02: off r Call going msg { 0x0002 } r Call in progress { 0x0003, seqnr } r Remote end hang up { 0x0004, seqnr, ?, error (like in netmon in 39) } r incoming call alert { 0x0005, seqnr, numlen, "number", namelen, "name" } s Answer call part 2 { 0x0006, seqnr, 0x00 } r answered call { 0x0007, seqnr } s Hang up { 0x0008, seqnr, 0x85 } r terminated call { 0x0009, seqnr } r call msg { 0x000a, seqnr } r Send DTMF/voice call { 0x0040} s Answer call part 1 { 0x0042,0x05,0x01,0x07,0xa2,0x88,0x81,0x21,0x15,0x63,0xa8,0x00,0x00, 0x07,0xa3,0xb8,0x81,0x20,0x15,0x63,0x80 } s Sent after issuing { 0x0042,0x05,0x81,0x07,0xa1,0x88,0x89,0x21,0x15,0x63,0xa0,0x00,0x06, data call 0x88,0x90,0x21,0x48,0x40,0xbb,0x07,0xa3, (digital lines) 0xb8,0x81,0x20,0x15,0x63,0x80 } s Sent after issuing { 0x0042,0x05,0x01,0x07,0xa2,0xc8,0x81,0x21,0x15,0x63,0xa8,0x00,0x00, data call 0x07,0xa3,0xb8,0x81,0x20,0x15,0x63,0x80, (non digital lines) 0x01,0x60 } s Send DTMF { 0x0050, length, {ascii codes for DTMF}, 0x01 } Note: to make data call (non digital lines): 1.send "Make call" for non digital lines 2.send "Sent after issuing data call (non digital lines)" to make data call (digital lines): 1.send "Answer call part 1" 2.send "Sent after issuing data call (digital lines)" 3.send "Make call" for digital lines to answer call: 1.send "Answer call part 1" 2.send "Answer call part 2" 0x02: SMS handling s Send SMS message { 0x0001, 0x02, 0x00 (SEND REQUEST), ... } r Message sent { 0x0002 } r Send failed { 0x0003, ?, ?, error (like in netmon in 65)} s Get SMS message { 0x0007, 0x02, location, 0x01, 0x64 } s Initiate connection { 0x000d, 0x00, 0x00, 0x02 } r Initiate ACK { 0x000e, 0x01 } r SMS message received { 0x0010, ...... } (whole message) s Set CellBroadcast { 0x0020, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01 } for enable cell broadcast ? 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } for disable cell broadcast ? r Set CellBroadcast OK { 0x0021, 0x01 } r Read CellBroadcast { 0x0023, ?, ?, ?, channel, ?, message... } ? s Set SMS center { 0x0030, 0x64, priority, checksum? ,0?, format, validity, {DefaultRecipient no.}[12], {SMScenter no.}[12], {SMSC name}, 0x00} where tel.no.[12]: {len, type, {number(BCD)}} type: 0x81: normal 0x91: + (international) 0xd0: alphanumeric format: 0x00: text 0x22: fax 0x24: voice 0x25: ERMES 0x26: paging 0x31: X.400 0x32: email validity: 0x0b: 1 hour 0x47: 6 hours 0xa7: 24 hours 0xa9: 72 hours 0xad: 1 week 0xff: max.time r Set SMS center OK { 0x0031 } r Set SMS center error { 0x0032, reason } s Get SMS center { 0x0033, 0x64, priority } r SMS center received { 0x0034, priority, checksum?, format, 0x00?, validity, {DefaultRecipient no.}[12], {SMScenter no.}[12], {SMSC name}, 0x00} tel.no[12]: {len, type, {number(BCD)}} where priority, checksum, type, validity, tel.no.[12]: see 0x02/0x0030 r SMS center error recv { 0x0035, reason } 0x03: Phonebook functions s Get mem location { 0x0001, memtype, location, 0 } where memory: 0x01: telephone and SIM phonebook (in one) 0x02: telephone phonebook 0x03: SIM phonebook 0x04: SIM fixdialling-phonebook (?) 0x05: Own numbers 0x07: Dialled numbers 0x08: Missed calls 0x09: Received calls 0x0b: voice mailbox (location not important) r mem location recvd { 0x0002, 0x00,namelen,"name",numlen,"number",groupID, 0x01?, yearLO, yearHI, month, day, hour, minute, sec. } Note: in 3310 all entries have null name ("feature" of bug ?) r mem loc error recvd { 0x0003, errtype } where errtype: 0x7d: invalid memory type s Set mem location { 0x0004, memtype,location,namelen,"Name",numlen,"number",groupID } r mem set OK { 0x0005 } r mem set error { 0x0006, errtype } where errtype: 0x7d: name is too long s Mem status request { 0x0007, memtype } r Mem status recvd { 0x0008, memtype, free, used } r Mem status error recv { 0x0009, errtype } where errtype: 0x6f: mem status error 0x7d: invalid memory type 0x8d: waiting for pin s Get caller group data { 0x0010, groupID } r Get caller group data { 0x0011, groupID, size, "Name", ringtoneID, graphic_on?1:0, lenHI, lenLO, OTABitmap (72x14 logo) } r Get call.group error { 0x0012, reason } where reason: 0x7d: invalid location s Set caller group data { 0x0013, groupID, size, "Name", ringtoneID, graphic_on?1:0, lenHI, lenLO, OTABitmap (72x14 logo) } r Set caller group OK { 0x0014 } r Set call.group error { 0x0015, reason } where reason: 0x7d: invalid location s Get speed dial { 0x0016, index(1-9) } r Get speed dial OK { 0x0017, mem.type, location } where mem.type: 0x02: ME (== 0 if not stored) 0x03: SIM location: memory location (== 0 if not stored) r Get speed dial error { 0x0018 } s Set speed dial { 0x0019, index(1-9), mem.type, location } r Set speed dial OK { 0x001a } r Set speed dial error { 0x001b } 0x04: Phone Status s Phone status { 0x0001 } r Phone status { 0x0002, mode, signal str, ???, pwr, batt.level } where mode: 1: registered within the network 2: call in progress 3: waiting for pin 4: powered off pwr: 1: AC/DC 2: battery s Request Phone ID { 0x0003 } r RequestPhone ID { 0x0004, 0x01,"NOKIA""imei", 0, "model", 0, "prod.code", 0, "HW", 0, "firmware", 0x00, 0x01 } 0x05: Profile settings s Set profile feature { 0x0010, 1, nr, feature, a, 1 } where nr: see 0x05/0x0013 feature: see 0x05/0x0014 a: see 0x05/0x0014 r Set profile feat. OK { 0x0011, 1 } s Get profile feature { 0x0013, 1, nr, feature, 1 } where nr is profile number (general=0, silent, meeting, outdoor, pager, car, headset=6) feature: see 0x05/0x0014 r Get profile feature { 0x0014, 1, nr, feature, 4, a, b, c, d, 1 } Features and answers (in a, b, c, d form): 0x00: keypad notes (in Nokia 3310 feature 0x00) xx, 1, 0, 2 xx: 0xff: off 0x00: level 1 0x01: level 2 0x02: level 3 0x01: lights (? only in car profile) (what number in Nokia 3310 ?) xx, 0, 0, 1 xx: 0x00: off 0x??: on (maybe 0x01) 0x02: incoming call alert (in Nokia 3310 feature 0x01) xx, 1, 0, 7 xx: 1: ringing, 2: beep once, 3: unknown 4: off 5: ring once 6: ascending 7: caller groups (see feature #0x08) 0x03: ringing tone (in Nokia 3310 feature 0x02) xx, 0, 0, 0 xx: 0x12: ring ring 0x13: low etc 0x04: ringing volume (in Nokia 3310 feature 0x03) xx, 0, 0, 0 xx: level 1 (0x06) - level 5 (0x0a) 0x05: message alert tone (in Nokia 3310 feature 0x04) xx, 1, 0, 4 xx: 0: no tone 1: standard 2: special 3: beep once 4: ascending 0x06: vibration (in Nokia 3310 feature 0x05) xx: 0: off 1: on 0x07: warning and game tones (in Nokia 3310 feature 0x06 called warning tones) xx, 4, 0, 4 xx: 0xff: off 0x04: on 0x07: screen saver - Nokia 3310 xx: 1: on 0: off 0x08: incoming caller groups (what number in Nokia 3310 ?) xx, 0, 0, 0 xx: 1: family 2: VIP 4: friends 8: collegues 16: other 0x09: automatic answer (what number in Nokia 3310 ?) xx, 0, 0, 1 xx: 0x00: off 0x01: on s Get welcome message { 0x0016 } r Get welcome message { 0x0017, no.of blocks, { block } * } where block: { id, {blockspecific} } id: 1: startup logo { y, x, picture (coding?) } 2: welcome note { len, "message" } 3: operator msg { len, "message" } s Set welcome message { 0x0018, no.of blocks, { block } * } where block: see 0x05/0x0017 r Set welcome OK { 0x0019, 0x01 } s Get profile name { 0x001a, nr } where nr: see 0x05/0x0013 r Profile name { 0x001b, 1, 1, 3, flen, nr, len, {text} } where nr: see 0x05/0x0013 len: text length flen len + len(nr, len) = len + 2 Note: in Nokia 3310 name is in Unicode s ??? { 0x001c } r ??? { 0x001d, 0x93 } s Set oplogo { 0x0030, location, MCC1, MCC2, MNC, lenhi=0x00, lenlo=0x82, OTABitmap } r Set oplogo OK { 0x0031 } r Set oplogo error { 0x0032, reason } where reason: 0x7d invalid location s Get oplogo { 0x0033, location } where location: 1 (doesn't seem to matter) r Get oplogo { 0x0034, location, MCC1, MCC2, MNC, lenhi=0x00, lenlo=0x82, OTABitmap } r Get oplogo error { 0x0035, reason } where reason: 0x7d invalid location s Set ringtone { 0x0036, location,0x00,0x78, ringtone packed according to SM2.0} r Set ringtone OK { 0x0037 } r Set ringtone error { 0x0038, reason } where reason=0x7d, when not supported location s Get services settings { 0x0080, setting (2 bytes) } where: setting: 0x02,0x00=Nokia access number 1 0x02,0x01=Operator access number 1 0x01,0x00=Personal bookmark 1 settings (name only ?) 0x01,0x01=? 0x02,0x02=? r Get services sett.OK { 0x0081, .... } r Get services sett.err { 0x0082, 0x7b } 0x06: Calling line restriction/Call forwarding etc s Set call divert { 0x0001, 0x03, 0x00, divtype, calltype, 0x01, number(packed like in SMS), 0x00, 0x00...,timeout} NOTE: msglen=0x37 where timeout: 0x00: not set ? 0x05: 5 second 0x0a: 10 second 0x0f: 15 second 0x1e: 20 second 0x14: 25 second 0x19: 30 second where divtype: 0x02: all diverts for all call types ? Found only, when deactivate all diverts for all call types (with call type 0x00) 0x15: all calls 0x43: when busy 0x3d: when not answered 0x3e: if not reached calltype: 0x00: all calls (data, voice, fax) 0x0b: voice calls 0x0d: fax calla 0x19: data calls s Deactivate calldiverts{ 0x0001, 0x04, 0x00, divtype, calltype, 0x00 } where divtype, calltype: see above s Get call diverts { 0x0001, 0x05, 0x00, divtype, calltype, 0x00 } where divtype, calltype: see above r Get prepaid(?) info { 0x0005, ?,?,?,length,message(packed like in 7bit SMS)} 0x07: s ??? { 0x0022, ? (1&2 sounds OK) } r ??? OK { 0x0023, ?,?,? } r ??? error { 0x0024, reason } s ??? { 0x0025, ??? } r ??? OK { 0x0026, ??? } r ??? error { 0x0027, reason } 0x08: Security codes s Change code { 0x0004, code, "current", 0x00, "new", 0x00 } where code: 1: security code (5 chars) 2: PIN (4 chars) 3: PIN2 (4 chars) 4: PUK (8 chars) 5: PUK2 (8 chars) s Status request { 0x0007, 0x01 } r pin recvd { 0x0008, accepted } where accepted: 0x0c (or 0x06): OK code: waiting for (0x08/0x0004) code s entering code { 0x000a, code, "code", 0x00 } where code: see 0x08/0x0004 0x09: SIM login r login { 0x0080 } r logout { 0x0081 } 0x0a: Network status s Key duplication on/off{ 0x0044, on? 0x01: 0x02 } s get used network { 0x0070 } r network registration { 0x0071, ?,?,?,length,netstatus,netsel,cellIDH,cellIDL,lacH,lacL,netcode,netcode,netcode } 0x0c: Keys s Get key assignments { 0x0040, 0x01 } r Get key assignments { 0x0041, {key '1'}, 0x00, {key '2'} ... {key '0'}, 0,0,0, {symbols}, 0 } where {key '0'} => ' ', '0' s Press key { 0x0042, press: 0x01; release: 0x02, button, 0x01 } where button: 0x01 - 0x09: 1-9 0x0a: 0 0x0b: # 0x0c: * 0x0d: Power 0x0e: Pick up phone 0x0f: Hang 0x10: Volume + 0x11: Volume - 0x17: Up 0x18: Down 0x19: Menu 0x1a: Names 0x1B onwards: don't know but they do produce a beep and light up the keypad as if a key had been pressed. r Press key ack { 0x0043, press/release/error(0x05) } s ??? { 0x0044 } r ??? ack { 0x0045, 0x01 } 0x0d: Status r Display { 0x0050, 0x01, y, x, len, "string"(unicode) } s Status request { 0x0051 } r Status { 0x0052, no. of byte pairs, {byte pair} } where {byte pair}: {cmd, 1:off 2:on} cmd: 1: call in progress 2: ??? 3: have unread sms 4: voice call active 5: fax call active 6: data call active 7: key lock active 8: is SMS storage full s Display status { 0x0053, 1:on 2:off } (will send displayed messages with x,y coordinates) r Display status ack { 0x0054, 1 } 0x11: Phone clock & alarm s set date and time { 0x0060, 1,1,7,yearh,yearl,month,mday,hour,min,0x00 } r date and time set { 0x0061 } s get date and time { 0x0062 } r date and time recvd { 0x0063,date_set?,time_set?,?,?,yearh,yearl,month,mday,hour,min,second } where: date_set & time_set==0x01 - set 0x00 - not set, ?,?,yearh,yearl,month,mday,hour,min,second not available in frame s set alarm { 0x006b, 1,32,3,0x02(on-off),hour,min,0x00 } r alarm set { 0x006c } s get alarm { 0x006d } r alarm received { 0x006e,?,?,?,?,alrm(==2:on),hour,min } 0x12: Connect to NBS port (61xx only ?) s Send {+0x0c, 0x01, UDH header, data} (without 0,1 header -- for oplogo, cli, ringtone etc upload) where: UDH header = 0x06, 0x05, 0x04,destporth,destportl,srcporth,srcportl Seems not to work in MBUS! 0x13: Calendar notes s Write calendar note { 0x0064, 0x01, 0x10, length, type, yearH, yearL, month, day, hour, timezone, alarm?(alarm yearH, yearL, month, day, hour, timezone): (0,0,0,0,0,0), textlen, "text" } r Write cal.note report { 0x0065, return } where return: 0x01: ok 0x73: failure 0x81: calendar functions busy. Exit Calendar menu and try again s Calendar notes set { 0x0066... } r Calendar note recvd { 0x0067, 0x01, ?, length, type, yrH,yrL,mon,day,hr,tz,alrm yrH,yrL,mon,day,hr,tz,textlen, "text" } r Cal.note recvd error { 0x0067, err } where err: 0x93: not available (0x01: OK) other: error s Delete cal.note { 0x0068, location } r Del. cal.note report { 0x0069, err } where err: 0x01: OK 0x93: cannot delete 0x14: SMS funcs s Write SMS to SIM { 0x0004, .... } s Mark SMS as read { 0x0007, 0x02, location, 0x00, 0x64 } r SMS message frame rcv { 0x0008,subtype,?,num,?,BCD(smscenter)...} 20->type, 22->status where type: 0x06: delivery report status: 0x00: delivered 0x30: pending 0x46: failed 0x09: reading failed subtype: 0x02: invalid mem type 0x07: empty SMS location 0x0c: no access to memory (no PIN in card, etc.) s Delete SMS message { 0x000a, 0x02, location } r Delete OK { 0x000b } s SMS status request { 0x0036, 0x64 } r SMS status { 0x0037,?,?,?,?,?,?,msgnumber,unread } r SMS status error { 0x0038 } 0x40: Security commands s ??? {+0x00, 0x00, 0x07, 0x11, 0x00, 0x10, 0x00, 0x00} This frame hangs phone (N3310 4.02). Meaning unknown ! s Open simlock 1 { 0x02, 0x03, 0x1f, 0x11, 0x01, 0x01, 0x10, 0x00} r Open simlock 1 { 0x02 } s ???(N6150) { 0x08, 0x00 } r ???(N6150) { 0x08 } s Enable extended cmds { 0x64, cmd } where cmd: 0x00: off 0x01: on 0x02: enter service mode ? 0x03: reset (doesn't ask for PIN again) 0x04: reset (PIN is requested) In 5110 makes reset without PIN 0x06: CONTACT SERVICE!!! Don't try it! s Reset phone settings { 0x65, value, 0x00 } where value: 0x08 - reset UI (User Interface) settings 0x38 - reset UI, SCM and call counters r Reset phone settings { 0x65, 0x00 } s Get IMEI { 0x66 } r Get IMEI { 0x66, 0x01, IMEI, 0x00} s (ACD Readings)?(N6150 { 0x68 } r (ACD Readings)?(N6150 { 0x68, ... } s Get Product Profile Settings { 0x6a} r Get Product Profile Settings { 0x6a, 4bytes with Product Profile Settings } s Set Product Profile Settings { 0x6b, 4bytes with Product Profile Settings } r Set Product Profile Settings OK ? { 0x6b } s Get code { 0x6e, code } where code: see 0x08/0x0004 (only sec.code is allowed) r Get code { 0x6e, code, allowed, allowed? (sec code (text)) } where code: see 0x08/0x0004 allowed: 0: no 1: yes s Set code { 0x6f, code, sec code(text), 0x00 } where code: see 0x08/0x0004 s Start monitoring { 0x70, block } where block(N6150): 0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xf9,0x76,0x65,0x20,0x00, 0x00,0x00,0x00,0x00,0x18,0x26,0x15,0x7d,0x0a,0x00, 0xf5,0x82,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xf0,0x77,0x80, 0x77,0x80,0xf2,0x82,0x20,0x20,0x20,0x20,0x20,0x20, 0x20,0x20,0x20,0x20 This block enables probably all possible monitorred parameters. After it phone sends 0x00 message type values s Break monitoring { 0x71 } r Break monitoring { 0x71 } s Reset Permanent Counters (nm->test36) { 0x74, 0x01, 0x01, 0x0e } r Reset Permanent Counters (nm->test36) { 0x74 } s Call commands { 0x7c, block } where where: command, (values) command: 0x01 values: number(ASCII), 0x00 - makes voice call command: 0x02 - answer call command: 0x03 - release call r Call commands { 0x7c, command } s Netmonitor { 0x7e, field } where: field: 00: next F0: reset F1: off F2: field test menus F3: developer menus s Open simlock 2 { 0x81, 0x01, locknumber, 0x10, 0x10, 0x10, 0x10, 0x10 } Note: sets simlock type to factory? where locknumber: 1,2,4,8 s Open simlock 2 { 0x81, 0x01, locknumber } where locknumber: 1,2,4,8 s Close simlock { 0x82, 0x01, locknumber, 0x00, 0x00, locksinfo(lock1,4,2,3), 0x00 } where locknumber: 1,2,4,8 r Close simlock { 0x82, the rest like in 0x40/0x8a } s Get simlock info { 0x8a, 0x00} r Get simlock info { 0x8a, 0x00, 0x01, lockstype, locksclosed, 0x00, 0x00, locksinfo(lock1,4,2,3), counter1,counter2,counter4,counter4,0x00 } where: lockstype: bit1,bit2,bit3,bit4 - if set, selected lock is user lock locksclosed: bit1,bit2,bit3,bit4 - if set, selected lock is closed counter1 - counter4: counters for locks s Set downloaded OpName { 0x8b, 0x00, MCC1, MCC2, MNC, Name, 0x00 } r SetdownloadedOpNameOK?{ 0x8b, 0x00, 0x01 } s Get downloaded OpName { 0x8c, 0x00 } r Get downloaded OpName { 0x8c, 0x00, 0x01, MCC1, MCC2, MNC, Name, 0x00,...} s Buzzer pitch { 0x8f, volume, hzLO, hzHI } if volume and hz is 0, it's off r Buzzer pitch { 0x8f} s ACD Readings ? { 0x91, parameter?(0x02,0x03,0x04,0x05,0x07) } r ACD Readings ? { 0x91, parameter?, value? } s Sleep mode test { 0x92, 0x00, 0x00, howlong(2 bytes), enable } where: enable == 0x01 - enable after test 0x00 - don't enable after test howlong (ms) = 0x07, 0xd0 = 2000 s ???(N6150) { 0x98, 0x00 } r ???(N6150) { 0x98, 0x00, 0x04 } s Get bin ringtone { 0x9e, location } where: location=0,1,etc. r Get bin ringtone { 0x9e, location, error, contents... } where location=0,1,etc. error=0x0a, ringtone NOT available 0x00, OK s Set bin ringtone { 0xa0, location, 0x00, contenst... } where: location=0,1,etc. r Set bin ringtone { 0xa0, location, error } where location=0,1,etc. error=0x0a, ringtone NOT set 0x00, ringtone set OK r Get MSid { 0xb5, 0x01, 0x2f, msid, 0x25 } s Get info about phone { 0xc8, 0x01 } r Get info about phone { 0xc8, 0x01, 0x00, "V ", "firmware", 0x0a, "firmware date", 0x0a, "model", 0x0a, "(c) NMP.", 0x00 } s Get MCU SW Checksum { 0xc8, 0x02 } r Get MCU SW Checksum { 0xc8, 0x02, 0x00, checksum (4 bytes),0x00 } s DPS External SW { 0xc7, 0x03 } r DSP External SW { 0xc7, 0x03, 0x00, string,0x00 } s Get HW { 0xc8, 0x05 } r Get HW { 0xc8, 0x05, 0x00, HW version (4 bytes), 0x00 } s Get "Made" Date { 0xc8, 0x05 } r Get "Made" Date { 0xc8, 0x05, 0x00, date(4 bytes), 0x00 } s Get DSP Internal SW { 0xc8, 0x09 } r Get DSP Internal SW { 0xc8, 0x09, 0x00, version (1 bytes), 0x00 } s Get PCI version { 0xc8, 0x0b } r Get PCI version { 0xc8, 0x0b, 0x00, version, 0x00 } s Get system ASIC { 0xc8, 0x0c } r Get system ASIC { 0xc8, 0x0c, 0x00, string, 0x00 } s Get COBBA { 0xc8, 0x0d } r Get COBBA { 0xc8, 0x0d, 0x00, string, 0x00 } s Get PLUSSA { 0xc8, 0x0e } r Get PLUSSA { 0xc8, 0x0e, available, 0x00 } where available: 0x01: not available s Get CCONT { 0xc8, 0x0f } r Get CCONT { 0xc8, 0x0f, available, 0x00 } where available: 0x01: not available s Get PPM version { 0xc8, 0x10 } r Get PPM version { 0xc8, 0x10, 0x00, "V ", "firmware", 0x0a, "firmware date", 0x0a, "model", 0x0a, "(c) NMP.", 0x00 } s Get PPM info { 0xc8, 0x12 } r Get PPM info { 0xc8, 0x12, 0x00, PPM version ("B", "C", etc.), 0x00 } s Set HW version { 0xc9, 0x05, version, 0x00 } s Get Product Code { 0xca, 0x01 } r Get Product Code { 0xca, 0x01, 0x00, number, 0x00 } s Get Order Number { 0xca, 0x02 } r Get Order Number { 0xca, 0x02, 0x00, string, 0x00 } s Get Prod.Ser.Number { 0xca, 0x03 } r Get Prod.Ser.Number { 0xca, 0x03, 0x00, number, 0x00 } s Get Basic Prod.Code { 0xca, 0x04 } r Get Basic Prod.Code { 0xca, 0x04, 0x00, number, 0x00 } s Set Product Code { 0xcb, 0x01, product code, 0x00 } s Set Order Number { 0xcb, 0x02, number, 0x00 } s Set Prod.Ser.Number { 0xcb, 0x03, number, 0x00 } s Get (original ?)IMEI { 0xcc, 0x01 } r Get (original ?)IMEI { 0xcc, 0x01, IMEI, 0x00 } s Get Manufacture Month { 0xcc, 0x02 } r Get Manufacture Month { 0xcc, 0x02, 0x00, string, 0x00 } s Get Purchare date { 0xcc, 0x04 } r Get Purchare date { 0xcc, 0x04, 0x00, string, 0x00 } s Set "Made" date { 0xcd, 0x02, string, 0x00 } s Make "all" phone tests{ 0xce,0x1d,0xfe,0x23,0x00,0x00} s Make one phone test { 0xce,0x1d,num1,num2,num3,num4} Where num1-num4: 0x02,0x00,0x00,0x00; 0x04,0x00,0x00,0x00; 0x08,0x00,0x00,0x00; 0x10,0x00,0x00,0x00; 0x20,0x00,0x00,0x00; 0x40,0x00,0x00,0x00; 0x80,0x00,0x00,0x00; 0x00,0x01,0x00,0x00; 0x00,0x02,0x00,0x00; 0x00,0x04,0x00,0x00; - "Power off" No test for "Security data" 0x00,0x10,0x00,0x00; 0x00,0x20,0x00,0x00; 0x00,0x40,0x00,0x00; 0x00,0x80,0x00,0x00; 0x00,0x00,0x01,0x00; .... 0x00,0x00,0x10,0x00; s Result of phone tests { 0xcf } r Result of phone tests { 0xcf, number of tests, results of next tests } s ??? { 0xd1 } r ???(N5110) { 0xd1, 0x00, 0x1d, 0x00, 0x01, 0x08, 0x00 } s LCD Test { 0xd3, value } where value: 0x03, 0x02 - 1'st test 0x03, 0x01 - 2'nd test 0x02, 0x03 - clears screen s ACD Readings(N6150)? { 0xd4, 0x02, 0x00, 0x02, 0x00, 0x0e, 0x01} r ACD Readings(N6150)? { 0xd4, 0x02, 0x00, 0x02, 0x00, 0x0e, 0x01, ?} s Get EEPROM { 0xd4, 0x02, 0x00, 0xa0, locationLo, locationHi, numofbytes } where: numofbytes - how many bytes to read Note: Works ONLY in MBUS r Get EEPROM { 0xd4, 0x02, 0x00, 0xa0, locationLo, locationHi, numofbytes, contest... } where numofbytes - how many bytes available contest - bytes with contests (if numofbytes != 0) 0x41: Snake game ? 0x47: s Get Picture Image { 0x0001, location } r Get Picture Image when contains sender number { 0x0002, location, number(like in SMS), 0x00, len, text, 0x00, width, height, 0x01, bitmap } NOTE: Supports only 0x81 and 0x91 coding (NOT alphanumeric numbers!) in sender without sender number { 0x0002, location, 0x00, 0x00, 0x00, len, text, 0x00, width, height, 0x01, bitmap } s Set Picture Image { 0x0003, frame...} where frame: see 0x47/0x0002 r Get/Set PictureImageOK{ 0x0004 } r Set Picture Image err { 0x0005, error? } where error=0x74 - wrong location ? 0x64: s Phone ID request { 0x0010 } r Phone ID recvd { 0x0011, "NOKIA", "imei", 0, "model", 0, "prod.code", 0, "HW", 0, "firmware", magic bytes x 4 ... } s Accessory connection { 0x0012, 16x0x00, 'NOKIA&NOKIA accessory', 3x0x00 } (45 bytes) 0x7f: Acknowledge(FBUS/IRDA){+type, seq } Acknowledge(MBUS)... 0xd0: s Power on message seq1 {+04 } r Power on message seq1 {+05 } 0xd1: s Get HW&SW version { 0x0003, 0x00 } 0xd2: r Get HW&SW version { 0x0003 "V " "firmware\n" "firmware date\n" "model\n" "(c) NMP." } 0xda: ? (during playing 2 player snake) 0xf0: s Send RLP frame {+0x00, 0xd9, ... } 0xf4: Power on message seq 2