X-Git-Url: https://git.jankratochvil.net/?p=gnokii.git;a=blobdiff_plain;f=Docs%2Fen_US%2Fgsm%2Fcables%2Fcables.htm;fp=Docs%2Fen_US%2Fgsm%2Fcables%2Fcables.htm;h=a2f9faef612644475733b38b03fee61f7cd74b81;hp=3b14ef63e60dc621e21cf2c0cb15dc798b6d59fa;hb=9243ae4a92a0e97f3c850018930fc50ff3f75544;hpb=1a6c5e5f47c4e40cacea0f72f0431e11a8dc9f0f diff --git a/Docs/en_US/gsm/cables/cables.htm b/Docs/en_US/gsm/cables/cables.htm index 3b14ef6..a2f9fae 100644 --- a/Docs/en_US/gsm/cables/cables.htm +++ b/Docs/en_US/gsm/cables/cables.htm @@ -1,130 +1,130 @@ - -
- - -What cables are used for Nokia phones ?
-
Nokia phone can support three protocols of transmission over cable: - -
-
You cable can support each of them...and phone must be compatible with it -(for example, CAN'T use DLR-3 with phone, which show "headset connected" -after connecting it)... - -
Schematics
-
Simple M2BUS (only) cable: -
-
Note:
-
-
FBUS cable: -
- -
Switch for M2BUS/FBUS for cable above: -
- -
Cable for AT mode is unavailable here, because it needs programmed chip -and I don't know, what programm should be inside... - -
To make FBUS/MBUS cable you have to connect: -
-
Phone connectors
-
What are original cables for Nokia phones ?
-
-
Can I use DLR-3 cable with my phone ?
-
See post from gnokii maillist: - -
The dlr-3 CAN'T work with the older phones. this is because the -converter in the cable is powered by the phone. this is done by the -phone by raising the !mic-gnd! pin to vcc. if the cable doesn't -repond on the mbus after 1 second, the power is dropped. a older -phone doesn't do this, so the converter is unpowered. - -
To decide if a phone needs a dau-9 (the old one, powered by pc) or -the new one (dlr-3) simply connect a dlr-3 to the phone. if the -phone says "headset connected" it isn't capable of using a dlr-3 -and you have to change to a dau-9. - -
Page created from materials from www.fkn.pl - - - - + +
+ + +What cables are used for Nokia phones ?
+
Nokia phone can support three protocols of transmission over cable: + +
+
You cable can support each of them...and phone must be compatible with it +(for example, CAN'T use DLR-3 with phone, which show "headset connected" +after connecting it)... + +
Schematics
+
Simple M2BUS (only) cable: +
+
Note:
+
+
FBUS cable: +
+ +
Switch for M2BUS/FBUS for cable above: +
+ +
Cable for AT mode is unavailable here, because it needs programmed chip +and I don't know, what programm should be inside... + +
To make FBUS/MBUS cable you have to connect: +
+
Phone connectors
+
What are original cables for Nokia phones ?
+
+
Can I use DLR-3 cable with my phone ?
+
See post from gnokii maillist: + +
The dlr-3 CAN'T work with the older phones. this is because the +converter in the cable is powered by the phone. this is done by the +phone by raising the !mic-gnd! pin to vcc. if the cable doesn't +repond on the mbus after 1 second, the power is dropped. a older +phone doesn't do this, so the converter is unpowered. + +
To decide if a phone needs a dau-9 (the old one, powered by pc) or +the new one (dlr-3) simply connect a dlr-3 to the phone. if the +phone says "headset connected" it isn't capable of using a dlr-3 +and you have to change to a dau-9. + +
Page created from materials from www.fkn.pl + + + +